항 목 (Item) | 단위(Unit) | H12V | |||
---|---|---|---|---|---|
사출 장치 Injection Unit |
스크류 타입 | ScrewType | A | B | |
스크류 지름 | ScrewDiameter | ㎜ | 16 | 18 | |
사출 압력 | InjectionPressure | ㎏/㎠ | 2570 | 2036 | |
이론 사출 용량 | TheoreticalInjection Volume | ㎤ | 8 | 10 | |
사출 스트로크 | InjectionStroke | ㎜ | 50 | ||
스크류 회전수 | ScrewSpeed | r.p.m | 0-300 | ||
형체 장치 Clamping Unit |
형체력 | Clamping Force | ton | 12 | |
형체 스트로크 | Clamping Stroke | ㎜ | 150 | ||
최소 금형 두께 | Minimum MoldThickness | ㎜ | 90 | ||
최대 형개 거리 | MaximumDaylight | ㎜ | 240 | ||
에젝터 압력 | EjectorForce | ton | 0.67 | ||
에젝터 거리 | EjectorStroke | ㎜ | 40 | ||
공 통 Common |
총전기 용량 | Totalwattage | ㎾ | 6.5 | |
전동기 용량 | Motor Capacity | ㎾ | 3.7 | ||
히터 용량 | HeaterCapacity | W | 800×2EA | ||
노즐 히터 | Nozzle Heater | W | 350 | ||
금형 히터 | MoldHeater | W | 400 | ||
호퍼 드라이어 | Hopper Drier | W | 400 | ||
히터 온도표시 | HeaterTemp. Display | ea | 3 | ||
기계 크기 (L×W×H) | MachineDimension(L×W×H) | m | 1.4×0.8×2.4 | ||
탱크 용량 | OilTank Capacity | ℓ | 60 | ||
기계 중량 | MachineWeight | ton | 1.0 |
※ 본사양은 품질 향상을 위하여 변경될 수 있습니다. (Above specifications are subject to change for improvement of their own quality)